Check Out
This Weeks Specials
click  here.

Home
This Weeks Specials
 
Parts Dept.
Map To
Store
Contact us
K&T Saw Shop
1199 N Hwy 1247
Somerset Ky 42503
Phone
606-678-9623
or  Fax
606-561-0209
Links old
GreenMachine Trimmer
gm index
Test  Site
my

 


Now, when your heavy field and brush mowing is done, you can quickly convert your DR FIELD and BRUSH MOWER into a 42" wide, walk-behind lawn mower by adding this optional, precision-cutting lawn deck attachment.

A typical walk-behind lawn mower cuts only 18" to 22" wide. It'll do the job, if you have the time. But many of us don't want to spend all our free time pushing or walking behind a narrow-cutting, small-wheels mower. At 42" wide, the DRŪ gets the job done in half the time and with half the walking! Compared to most riding mowers, the DRŪ with the optional lawn attachment mows just as wide...it handles slopes more easily and safely...it mows wet lawns without sinking in and making wheelmarks...and it gets closer to trees, shrubs, fences, and the like...so there's less follow-up trimming to do!

MOW WIDE-OPEN SPACES at up to 1/2 acre in 30 minutes, thanks to 4-speed transmission...or gear down for precision trimming around obstacles!

FEATURES:

FRONT CASTER WHEELS which swivel in any direction, combined with big drive wheels with built-in differential, is almost like having power steering.

INSTANT HEIGHT ADJUSTMENT allows you to change the cutting height from 1" to 3-3/4". No tools needed.

21" BLADES produce a beautifully level, clean cut.

SIDE-DISCHARGE spreads clippings out evenly without clumping--even when mowing tall grass! Also converts easily to mulching mode.

DECK OUT FRONT allows you to reach under trees, shrubs, and hard to get to places that are impossible to access with a belly-mounted riding mower.

CAST-IRON SPINDLE HOUSINGS are mounted on ball bearings and pregreased for extremely long life.

PIVOTING MOWER DECK follows ground contours to help eliminate scalping.

WIDTH OF CUT: 42"
MOWING HEIGHT: 1" min. to 3-3/4" max.
SPINDLE HOUSINGS: cast-iron
SPINDLE SHAFTS: preheat-treated steel
CASTER WHEEL SUPPORTS: 1.25" steel tubing, .125" thick
CASTER WHEELS: 9 x 3.50 -- 4 ply
WHEEL BEARINGS: 3/4" Ball
BLADES (2): 21" x 2.5" wide x .204" thick, heat-treated 5150 steel